BantaMount base for Elegoo Neptune 2 with BLTouch mount
Description
This is a custom base for [BantaMount](https://bantam.design/mount) cooling fangs adapted to fit Elegoo Neptune 2 mount with stock hotend. BLTouch mount included! ## Compatibility It works for me with "BantaMount Dual 40mm Fans" cooling fang, but I hadn't tested it with other fangs. It is up for you to check it. ## Required things * three M3×8 screws to screw base to mount itself: two screws go to the same positions as with the default cover and third one goes to the BLTouch mount top hole * two M3×8 screws to put BantaMount fangs on it * some screws to put your fans to fangs, see your fang description * if you have BLTouch, do not forget to autolevel after assembling! ## My setup As you can see on the attached photo, I used "Dual 40mm Fans" fang, because I already had few Noctua 40×40 fans. Be advised that they are not compatible with Elegoo Neptune 2 without additional modifications, so do your research first, there is a plenty of videos and blog posts about that. You might also notice that base on the photo is a bit different from the STL one. The one on the photo is a previous version, which had some issues, these were fixed already in attached STL. ## Further work While it kinda works already, there might be issues with latest model version, feel free to drop a comment about that. Please note that I'm not planning to do custom versions (for example, without BLTouch mount), you can always download STL file and do it by yourself.
Statistics
Likes
6
Downloads
0