Motospeed K23 Flush Tray Mount Case
Description
Flush mounted tray case for Motospeed K23 mechanical keypad you can purchase from Amazon. I designed this case to match both my Drevo Calibur V1 keyboards. This also works with the Calibur V2 but you will need to remove all 4 sticky feet from the Motospeed case and apply them to the bottom of the new case in all 4 corners again. This board is able to use the stock Drevo Calibur V1 keyboard feet or you can print the ones I created with a built in cam lock. You will use all the original hardware screws from the original Motospeed case so no additional hardware is needed. I didn't include the bottom switch to turn on and off the LED lights because I personally leave it off. The bottom PCB is also exposed while the feet are open due to space constraints but I don't personally see this as an issue. Feel free to modify the design if you feel otherwise. I printed this with Overture matte black PLA with standard settings flat to the bed. You can also print with the keys parallel to the bed if you prefer not to see the steps from layer lines.
Statistics
Likes
2
Downloads
0