Sliger CL530 LINKUP 4.0 Riser Adapter
Description
This allows the LINKUP Ultra PCIe 4.0 Riser Cable to be installed in the Sliger CL530. To avoid extra fasteners, the part must be pressed forcefully (hammered) onto the existing rear mounting pegs. The closed screw slit on the PCIe slot also needs to be cut so that it can be shifted back 1 or 2 mm. This risers has hard plastic protectors on the ends of the cables, so I would recommend using a heat gun (hair dryer) to make the cable more flexible so it can be shaped when installing. I ordered the 25cm cable, but the original cable appears to be 20cm. I personally like the way the cable aligns with the top of my GPU now.
Statistics
Likes
0
Downloads
0