PTFE FEMALE-FEMALE Coupler 6mm OD
Description
__Edit 2021-07-11__: Extended both PTFE by 20cm - to 1200mm __Edit 2021-07-05__: Placed both connectors at the hot-end on my Sigmax as it still sometimes interfere with the y movement when home. Cannot find a 1100 MM (length) PTFE in 4ID/6OD mm - only 1000mm. The 1M PTFE is just to short for the BCN3d Sigmax Decided to print a connector/coupler to lengthen it. When printing the inner core - use a raft otherwise the print will fail. The RIGHT extruder need to have the coupler at the hot-end otherwise it interferes with the endstop.
Statistics
Likes
1
Downloads
0