MICRO APEX R9/ELRS BACK PACK
Description
I saw a photo of a micro Apex frame rocking a Caddx Tarsier and decided to build one myself... Only problem is that there's not much room to play with so I decided to move the receiver to under the rear stack. You will need pliers and a sharp blade to remove the support material and cut through a single layer to allow the antenna to be fitted. With this mod the antenna will have to be removed and reinstalled onto the radio. There is also a space for a small buzzer (approx 9.2mm x 4.5mm). Use a dab of glue to hold everything in place,"Welder" is good as it sets like rubber and can be peeled off later. Be carful to insulate the radio and buzzer from the frame during assembly. Use 2 zip ties to secure the antenna to the frame and close the gap in the part. Happy flying.
Statistics
Likes
3
Downloads
0