Very Strong Handle
Description
I designed this handle because I haven't found any that was strong enough for my purposes. Printing: I printed that handle with 0.4 layer height with 0.6mm nozzle, 5 wall lines and 50% gyroid infill with PETG but you can adjust the settings for your needs. You should print it on it's side with a logo at the top as a top layer. Handle is 20cm long and you need at least two M4 screws to mount it. I used four M4 wood screws. Be careful to tighten the screw gentle (with electric screwdriver) to avoid breaking the handle.
Statistics
Likes
1
Downloads
0