SUNLU S1 FilaDryer 20x20 Mount + Guide
Description
This is remixed from: https://www.thingiverse.com/thing:4752571/comments Use these brackets to hold your Sunlu S1 FilaDryer on top of your printer, bolting onto the 20x20 aluminium. One version has a curved leg to add a M6 PTFE connector so you can use some Bowden tube as a guide. The hole is positioned Y+47mm from the centreline, which is perfect for a BIQU B1, and should work for most over printers like the Ender 3. The PTFE connector versions have a large hole for Z rod clearance, and should be mounted directly over it. It must also be used in conjunction with a SUNLU PTFE connector such as: https://www.thingiverse.com/thing:4650052 For BIQU B1 users, I recommend using this in conjunction with this filament roller guide: https://www.thingiverse.com/thing:4816969 or https://www.thingiverse.com/thing:4947347 Changes made (original to V1): -Internal chamfers made smaller so the unit seats properly. -Pitch between recesses where the feet sit changed from 50mm to 52mm (check your unit) -Diameter of recesses where the feet sit changed from ø16.5mm to ø17.25mm for a less critical fit. -Shape changed for more stability. -Cut-out for 20x20 extrusion designed at 20.30mm wide for an easy fit. -Guide for PTFE tube. Changes made (V1 to V2): -Move Sunlu unit back by 47mm, so the filament has a straight path to the extruder. -Less intrusive designs stop snagging on bowden tube when printing tall objects. -Bolted through the front, not the top. -Uses an M10 PC4-01 coupler so tube can go right through, meaning less drag -Filament guide doesn't stick out to the left as far. Please upload pictures if you make it, its nice to my designs being used :)
Statistics
Likes
64
Downloads
0