Sunlu FilaDryer Improved Fan Mount
Description
Inspired by [MidLifeHiker's](https://www.thingiverse.com/thing:4628798) and [jdobry's fan mount](https://www.thingiverse.com/thing:4729474) for the Sunlu FilaDryer, this one makes some changes to better fit inside the lid. The inside of the FilaDyer lid has curved seams running along the edges so I've filleted the top edges to allow the mount to sit flush with the top of the lid. I've also increased the width of the cable trench and added a small area for an optional buck/step-down converter if you want to convert 24V from the FilaDryer to a 12V or 5V fan. The mount is for 40x40x20mm fans and they fit quite snuggly, so may need to sand down any protrusions left from supports. The mounting holes have been changed to fit M3 brass inserts that are 6mm long and approximate ~5mm in diameter. Parts list: 4 x M3 straight brass inserts (6mm long) 4 x M3 bolts 1 x Cooltek 4020 Silent Fan 1 x ARCELI MP1584EN Step-Down Adjustable Module 24V to 12-3V
Statistics
Likes
2
Downloads
0