A/C drain extender plate for LG air conditioner
Description
Drain extender for LG window air conditioner model #LW6017R (may fit many other makes or models with a rear drain hole). Slices fine at 0.3mm, 2 perimeters, 2 shells, 10% gyroid infill. Print in the same orientation as it will be used. The drain is held in place on the AC by 17 neodymium disc magnets, 8mm x 3mm, glues into the recesses in the print. You may be able to use fewer. Two extensions are included that direct waste water farther away from the building; they are friction-fit (some cleanup may be required depending on the tolerances of your print). The extensions can be glued if desired. Please post a make photo if you print this; remixes welcome!
Statistics
Likes
0
Downloads
0