F1 Steering Wheel

Description

**In order to design the version with the 4.3 Nextion dsiplay and RPM LEDs, I used the step file from <a href="https://www.thingiverse.com/thing:3407002" title="Nextion Dash">Leecarl's design</a>** **This design uses a customized version of <a href="https://www.thingiverse.com/thing:4287823" title="Paddle shifters">these</a> paddle shifters from Conspicuous19** **The quick-release-system is inspired by <a href="https://www.thingiverse.com/thing:4151770" title="Quick-release-system">this</a> one from Weissnix4711** <br> Hey guys, this is my attempt on creating a fully 3D-printable F1 steering wheel. <h1>Parts list</h1> <br> <h2>Electronics:</h2> - 10x 12mm momentary switches - 2x Micro switches - 3x EC-11 rotary encoders with 20mm shaft / 3x KY-040 rotary encoders (choose the fitting "middlepart.stl") - 1x TM1638 (JY-LKM1638) LED module (headers need to be removed) OR 1x Nextion 4.3/3.5/2.8 inch display and 2x 8bit WS2812 LED board - 4x Neodymium magnets 10mm diameter x 5mm height - 1x GX12 4pin connector - 1x ProMicro - 1x Arduino Nano or (for the Nextion version) 1x USB to TTL module - 1x Small USB hub (USB 2.0 is sufficient for the TM1638 version, however, if you are using a bigger nextion display, you may want to use a USB 3.0 hub (and a USB 3.0 port on your PC) because of higher power requirements) - 1x 31.8mm bike clamp (for "quickreleasehub_g29.stl") - (Optional: Carbon fiber vinyl wrap (if you decide to apply a vinyl wrap to your steering wheel, then you may want to use the "middlepart_TM1638_flat_version.stl" or the "middlepart_nextion4.3inch.stl"...) <br> <h2>Screws:</h2>(see image 5 and 6) <h3>M2</h3> <ul> <li>4x M2x10</li> </ul> <h3>M3</h3> <ul> <li>4x M3x10</li> <li>4x M3x12</li> <li>8x M3x16 (for TM1638 version)</li> <li>4x M3x6 (for Nextion version)</li> <li>4x M3x4 (for Nextion version)</li> <li>8x M3x25</li> <li>24x M3 Nut</li> </ul> <h3>M4</h3> <ul> <li>2x M4x18</li> <li>2x M4x35</li> <li>4x M4 Nut</li> </ul> <h3>M5</h3> <ul> <li>3x M5x40</li> <li>3x M5 Nut</li> </ul> <h3>M6</h3> <ul> <li>4x M6x35 (for the </li> <li>4x M6 Nut</li> </ul>

Statistics

Category

Tags