Wemos D1 mini enclosure
Description
Didn't find any enclosures to my liking so I made one myself. The enclosure also fits a DHT22 and TSL2561. There is a slot in the enclosure to feed some extra wires through for an external sensor or other module. In the picture I added a PIR sensor using the mount from 43design (https://www.thingiverse.com/thing:3189398) The ESP8266 fits pretty snuggly into the enclosure. If it doesn't fit, make sure there are no obstructions from the printing process. Don't add pins to the ESP but solder in directly. It's not very modular but otherwise it had to be bigger... There are aditional 'lid' files to accomodate your preference regarding sensors. There is also a wall mount. Requires one 4mm screw, but smaller would probably also fit. I included the openSCAD file do you can make your own adjustments. BOM: 1x Wemos D1 mini (or a clone) 1x TSL2561 1x DHT22 2x m3 heat inserts 2x m3x6 machine screw wires
Statistics
Likes
1
Downloads
0