Snapmaker-2 A350 X-Axis & Head Cable Adapters & Cable Management
Description
CAUTION: Advanced makers as you will be cutting/soldering wires and changing plug ends !!!! Use at your own will and use caution. Not responsible for mis-wiring or damage to your machine. Also you will need to tap the x-axis upper carriage holes with an M5 tap to use the adapter. This is my cable adapter using chain guides up the z-axis for both the x-axis rail and also the head wiring. Most of the prints are out of the box ready to be used and a couple need brass threaded inserts to be inserted to make them work. Also included is cable clamps for the side of the Z-axis. Need to Print: (2) 3 wire Cable Clamps (1) 2-3 wire Cable Clamps (3) XZ-Cable back supports (5) X-Cable back supports (1) X-Chain Adapter Head (1) X-Chain Adapter Control End (1) XZ-Chain Adapter Upper (1) XZ-Chain Adapter Lower (1) X-Cable Clamp MATERIALS: (1) Hilitchi 460 Pcs M2 M3 M4 M5 Female Thread Brass Knurled Threaded Insert Embedment Nuts Assortment Kit. https://www.amazon.com/gp/product/B07VFZWWXY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 (1) Molex Micro-Fit 3.0 Dual Row (8 Circuits) Male & Female Receptacle Plug https://www.amazon.com/gp/product/B07997NH2Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 (1) Snapmaker Head Cable (email support and you can purchase extra cables). (2) Befenybay 10mm x 11mm Length 1Meter Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 for 3D Printer and CNC Machines (10mmx11mm-Outside Open) https://www.amazon.com/gp/product/B07QLGWQ1L/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 (28) M4 x 12mm Socket Head Cap Screws. or more (2) M5 x 12mm Socket Head Cap Screws. (9) M3 x 12mm Socket Head Countersunk Screws (9) M3 washer (9) M3 Nuts (plastic lock type) (3) M3x4x5mm brass threaded inserts. (3) M3 x 8mm Socket Head Countersunk Screws. (3) Mini black zip-ties to ties cable down. MISC: Shrink Teflon You will need to cut the ends off (2) Head Cables and install the Molex 8 pin connectors on each end. Make sure to keep colors aligned. Shorten the length of the cables to fit. There is a cable clamp on the top to lock the connectors down and to keep the cable from moving at the connectors. The x-axis cable is good to go with no changes. Tap the 2nd and 5th top row holes in the x-axis carriage with an M5 tap. You will not need to drill open the holes they are perfect for the M5 tap.
Statistics
Likes
39
Downloads
0