Remixed Frame for the #NanoLongRange
Description
I really like this project! Had to wait quite a while for the parts coming from China but when everything had arrived the build was done in some hours. It does not have much power but it flies quite good and you have a lot of stick time compared to a bigger quad. To make it look a little better I added a bevel on the edge of the arms. Some extra material gives a better fit for the camera and holes in the bottom part make the wiring easier. I turned the FC 180°, so the wires for the camera and the RX don't have to go across the hole board to the front and the back. And the VTX is stacked with the FC. This way I was also able to get some space for the capacitor and place it inside the bottom part. The holes for the FC/VTX stack are slightly smaller, so you can directly cut threads in there. With some superglue at the end of the build the screws stay in place. I also added holes for the battery tray so you don't have to cut off the pins on the bottem of it. This makes the building and maintenance process a lot easier.
Statistics
Likes
30
Downloads
0