Ball bearing crosscut sled for Bosch GTS10XC
Description
Ball bearing crosscut sled for Bosch GTS10XC Details on https://www.instagram.com/dirkityourself Post-No: 54 to 58 Direct-Links: https://www.instagram.com/p/CQ8ujG6I5Cs https://www.instagram.com/p/CQ1JhUVjp2j https://www.instagram.com/p/CQwbJxiIme3 https://www.instagram.com/p/CQvbgMgDdk_ https://www.instagram.com/p/CQuDQQ_D3pw 3D-printed parts: 4x Rollers, Left 4x Rollers, Right 8x Rollercover 2x Fencecover 6x Sliding block Additionally required material: 1x Multiplex 18mm, 590mm (max) x 700mm 1x Alu profile (item) 40mm x 80mm, 700mm length, 8mm slot Small parts for each roller: 5x Ball bearing, 683ZZ (7mm OD, 3mm bore, 3mm width) 3x Hexagon socket screw, M3 x 12mm, stainless steel recommended 2x Hexagon socket screw, M3 x 8mm, stainless steel recommended 5x Flat square nuts, M3 (DIN 562), stainless steel recommended To fix the rollers on the sled: 2x up to 4x Wood screw, countersunk flat head, 3mm x 25mm, star drive & stainless steel recommended Small parts for the fence: 6x Nuts, M5, stainless steel recommended 6x Hexagon socket screw, M5 x 25mm, stainless steel recommended Hints: The rollers are embedded in a slot on the bottom (16mm width, 2.5mm depth) The cutting height ist limited to 40mm for reasons of stability
Statistics
Likes
17
Downloads
0