WLED - Table Lamp DIYsigne
Description
Table Lamp ====== based on WLED. ---------- It was inspired by HUE signe but less expensive. See also: [Floor Lamp](https://www.thingiverse.com/thing:4905346) version Printing: ====== * Base: - Infil 20%, support is required for the hidden DC jack * Cover: - Infil 20%, support not needed, must be flipped in Slicer * End Cap: - Infil 20%, support not needed. must be blipped in Slicer Parts required: ====== * [Alu Profile round 0,5m](https://www.els-licht.de/isoled-rundprofil-round14-aluminium-eloxiert-200cm_21567_21526/) * LED Stripe (not every type of stripe are working with WLED, im using WS2811 or WS2815) * Wemos D1 Mini (or ESP32) * 1-Relais Shield for D1 Mini * DC Power Shield Board * Triplet Base Shield D1 Mini * [DC Socket](https://www.amazon.de/gp/product/B01LQGESUO) * Optional - [Microphone](https://www.amazon.de/gp/product/B08T1Y58HR/) * JST SM 4PIN / JST SM 3PIN (Depending on Stripe) * 4 x Screw 3,0x10 Torx Countersunk Head (needed for Base) * 1 x Screw 3,0x16 Torx Countersunk Head (needed for AluProfile) * 6 x Screw 3,0x10 Torx Countersunk Head (needed for Weight Cover) * 4 x Screw 2,5x6 Torx Pan Head (needed for Triplet Base) * 2 x Round Weight 50cmØ x 2cm (in my case Brass) Costs around € 65 depending on where the components were bought, plus filament. Assembling: ====== In progress
Statistics
Likes
16
Downloads
0