"The YETI" Triple Blower for Micro Swiss Direct Drive
Description
5015 Triple Blower for Micro Swiss Direct Drive (Edit: may work on stock setup without Direct drive) Must have the... Micro Swiss Direct Drive Extruder Only (part #M2602) or Micro Swiss Direct Drive Extruder and Hot End (part #M2601) Offset for my extruder: X= -48.5 Y= -8.5 Z= -1.75 to -2.10(set to -1.65 for the initial till you can find your Z Offset) Fits CR-10 CR-10 V2 CR-10-S5 CR-10-S4 CR-10S CR-10 MINI CR-20 CR-20 Pro Ender 2 Ender 3 Ender 3 Pro Ender 3 V2 -It may fit the stock Non-Direct Drive assembly (not confirmed) -It also physically fits the stock red hotend, (may need trimming for the Bowden tube fitting) -It may fit other applications or machines not listed above like the Ender 5. -If you print above the PLA temps +230C, then print in ABS/ASA/PETG -The 5015 Triple Blower is basically a cover and is held in place with the Micro Swiss hotend. The hotend slips in, and can easily be put in with the 2 screws that hold the hotend to the back plate, then install the hotend blower fan with the M4 screw/nut. -I made this to be easily disassembled, by taking off the M4 screw for the hotend blower, then the 2 screws for the hotend. -I made a BL Touch adaptor.... for the BL Touch (BECAUSE WHY NOT!?!?!?! LOL) -A 3M tap is needed for the screws that hold the Dual blower assembly(link below) -I already oriented the parts for the best way to be printed with tree supports and Brim if needed. I printed with a 0.6 Nozzle and 100% infill -For the Hot-end fan wires, the Yellow wire is the Positive and the Blue wire is Negative. -XH2.54 2Pin Female/Male Connections (for the wires for blowers to be quickly changed) https://www.amazon.com/gp/product/B088NW3DSP/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B088NW3DSP&linkCode=as2&tag=danieljaystah-20&linkId=620251270f82dc890d583d50bcce7a3e -5015 fan (you need 3, hence "Triple Blower" LOL) https://www.amazon.com/gp/product/B07DB7DLMM/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07DB7DLMM&linkCode=as2&tag=danieljaystah-20&linkId=6c06335a7729e0dac3f7f0b7d10aac6b -M3 tap set (As mention above) https://www.amazon.com/gp/product/B07FR7XD64/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07FR7XD64&linkCode=as2&tag=danieljaystah-20&linkId=ad92561f59d014293344f960b1bda946 -M3 and M4 hardware (for mounting) https://www.amazon.com/gp/product/B074Q4Z2C6/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B074Q4Z2C6&linkCode=as2&tag=danieljaystah-20&linkId=4a096e8c37c3814087fce109b13947eb
Statistics
Likes
7
Downloads
0