Hotwheels Audi Sport Quattro Display Base
Description
###If you like my display designs, feel free to follow me on twitter and instagram! Feel free to comment and provide any feedback too! ###[Twitter](https://twitter.com/Giga_Penguin) ###[Instagram](https://www.instagram.com/GigaPenguin3DPrinting/) Description ==================== A base for Hotwheels Audi Sport Quattro from the Thrill Climbers set, it should work with the mainline basic version as well. The display base is separated into 3 parts, name plate, the base and the back plate. Print Settings ==================== Nozzle size = 0.4 mm (minimum, smaller better) Layer height = 0.2 mm Filament change layer for colours on BoxBackAssem: 1) Layer 19 (Outer line of both stripe and "Audi Sport Quattro" lettering, mine is black) 2) Layer 24 (Middle stripe colours, mine is grey) 3) Layer 29 (Left stripe colour, mine is red) 4) Layer 34 (Both horizontal stripe, mine is yellow) Filament change layer for colours on name plate: 1) Layer 7 (Lettering on name plate) Colours ==================== Colours of all other items is your choice. Assembly ==================== The car is tied with metal wire through the display base holes, the wire will need to be slide between the wheels and the metal body. Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box. Others ==================== Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too. The transparent box I'm using to store the base and car in one of the picture is bought from here: https://shopee.com.my/Tarmac-Work-Protector-tarmac-box-i.13932494.1598531194
Statistics
Likes
12
Downloads
0