retail rake
Description
Retail hook rake for people with fat/clumsy hands and for those who want to reduce the spread of covid-19, should be short enough to print on a large printer, but designed with the cr-30 in mind Printing: (these are a guide and of course you need to make sure what you use works with your printer) Printed in kiri:moto for the cr-30 with layer - height of .2 shell, top, solid, and base count of 3 Base - shell speed of 25 flow factor 1 Brim sides 20 Everything else in this tab is 0 except for part anchor which is 2 Infill - type is hex fraction is 0.5 shell overlay is 0.3 speed is 0 solid start is 45 Support - Extruder is 0 Density is 0.25 Pillar size is 6 part offset 0.4 min area 0.25 expand is 1 max angle is 1 (I clicked on detect because cylinders fail otherwise) Output - Nozzle 190 Bed 50 fan 255 print speed 30 finish speed 20 move speed 50 shell, solid, and infill factor 1.1 shell order out-in layer start last layer retract (unchecked) belt first (checked)
Statistics
Likes
0
Downloads
0