CR10 V3 All Metal Hot End Upgrade
Description
Updating the CR10 V3 to use the V6 hot end by E3D. Modified Marlin Firmware is included. ***Glitch with Z-Offset, please follow video instructions for details*** ***Fan Mount Has been updated to allow for more room for the screw.*** I recommend doing the upgrade with a higher temperature resistant material. Although I made the original modification with PLA temporarily, I don't recommend this approach. Incrementally doing this upgrade may work for a very short period. If you have access to an SLA printer, you can use more industrial resins for the upgrade, which is the approach that I took and that I recommend. Print with ABS or other High Temperature Resistant material 0.2 mm is fine for the layer height Supports will be needed Video Tutorial Link:https://youtu.be/t5IcmfA0XmM Website Link: Website Link: https://yarkspirifantasyart.com/cr10-v3-all-metal-upgrade-cr-touch/ Supplies: 1) M3x40 (x1) screw 2) 1 M3 Nut 3) Zip ties small 4) Printed Parts
Statistics
Likes
7
Downloads
0