PS2 2.5" HDD & SSD converter/adapter/mount/caddy
Description
<h3> Design </h3> I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. <h3> Hardware </h3> All you'll need are some small screws to mount the HDD or SSD to the bracket. <i>These need to be 1mm flat countersunk heads, otherwise they stick out too far and wont fit inside!</i> <b> Update 7/20/21 </b> I discovered I had accidentally uploaded an older exported version, I fixed some tolerances, and added the "v2" in here. If you did print the first one, you may need to file down the top of the support legs a little bit, that's all.
Statistics
Likes
77
Downloads
0