35mm replacement fan blade Hobbywing Max6 / Arrma
Description
35mm replacement fan blade for Hobbywing Max6 and Arrma 35mm fans I made this a complete replacement vs a slide on design because I wanted the maximum amount of blade. A few millimeters matter when you need maximum cooling for something like the Max6 that gets pretty hot when in use. Updated the clip design. It printed well and worked just fine printed at .15 layer height with a .4 nozzle. Also added a fan that could use a 2mm countersunk machine screw. I have not tested this version but in theory it should work just fine. 8/11/21 Update: So... the screw version works best with a button head screw. You could screw in form the top of the fan blade but it actually works best if you screw it in from the bottom though the stator. This secures the fan and at the same time is the shaft, just make sure there is some slop.
Statistics
Likes
5
Downloads
0