Better HeroMeGen5 gantry adapter for Microswiss hotend WITH SOURCE
Description
I was having problems with the Microswiss hotend on my Ender3 using the HeroMe gen5 cooling system. The two screws kept coming loose after a couple months so the hotend started wobbling left and right, affecting print quality badly. This gantry adapter tries to fix the issue, with 2 side parts sticking out that "hug" the hotend at the very top, hopefully stopping the side movement. You can use this with the stock creality hotend but it won't be hugged in place because of its oval shape. PRINT WITHOUT SUPPORTS and then poke the screw holes open from the back. Use 0.2mm layer height. The gantry adapter is also manifold, geometries make more sense than the original, and the tolerances are tighter. Fusion360 source file is also included.
Statistics
Likes
3
Downloads
0