Tap Handles
Description
Tap Handles. Main handle has a slot to slide in beer style/name tiles. I've included what I have so far, but you can make your own sized 66.50mm x 110mm x 1.5mm. The threads are sized to fit brass inserts https://www.amazon.com/dp/B08K2V57MK?psc=1&ref=ppx_yo2_dt_b_product_details Print the handles upside down with no supports. The threads might have have loose filament strung across. I pulled most of that out with needle nose pliers and left some of it in there and it provides sufficient bite for the inserts to thread in and seat. The tiles are printed using color change at the various heights. I printed these all with a 0.6mm because I was too lazy to change the nozzle out. A smaller nozzle would make the tiles look better. 9/11/21 update: Added a Oktoberfest tile. Pretty intricate. The design has four levels for different colors. First level is white, then blue, red, and gold. Printed with a .2 nozzle and it looks OK. Probably would have done better if my PLA was properly dry. 1/1/22 update: Added Sour and Cider.
Statistics
Likes
4
Downloads
0