Clamp for Snapmaker A350 to clamp down Anycubic Ultrabase 330x310
Description
Hey, so we all know that the Snapmaker printplate is trash and is mostly impossible to become leveled correctly, so I bought Anycubic Ultrabase 330x310 glassplate and now it works like a charm. The clamps are so disigned that the fan wont hit the clamp on the under left corner. You have have to print twice the stl so you have 4 Clamps one for each corner. Watch out the orientation, the clamps are one side a bit longer. The longer side has to point to the outside of the glassplate. Print the clamps with Support. You print rhe clamps with PLA but than dont heat up your bed above 60C otherwise it will deform or just print with PLA+,PETG,ABS etc. IMPORTANT!!! Change your Start Gcode M104 S{material_print_temperature} ;Set Hotend Temperature M140 S{material_bed_temperature} ;Set Bed Temperature G28 ;home G90 ;absolute positioning G1 X-10 Y150 F3000 ;Move to mid left G1 Z0 F1800 ;Go to zero offset M109 S{material_print_temperature} ;Wait for Hotend Temperature M190 S{material_bed_temperature} ;Wait for Bed Temperature G92 E0 ;Zero set extruder position G1 E20 F200 ;Feed filament to clear nozzle G92 E0 ;Zero set extruder position
Statistics
Likes
0
Downloads
0