Raise3D Pro2 (Plus) Fan bracket for right extruder stepper
Description
This bracket is to attach a 40 x 40 x 10mm cooling fan on the stepper of the right extruder of the Raise 3D Pro2(Plus) printer. The bracket can be attached to a heat sink, which is fastened on the rear side of the stepper. The fan can be clamped into the bracket from the outside without any screws or adhesive. Construction works on two Raise3D Pro2 since hundreds of hours. The bracket is angled so that it fits in maximum Y axis position. Required accessories: 1x Heatsink 40 x 40 x11 mm (Like: https://www.3d-drucker-experte.de/en/raise3d-3d-printer/raise3d-accessories/sonstiges/1510/selbstklebende-kuehlrippen-passend-fuer-nema17-stepper-motor?c=1242) 1x Fan 40 x 40mmx 10mm (Like: https://www.amazon.com/ANVISION-Bearing-Brushless-Cooling-YDM4010B12/dp/B0711FVD48/ref=sr_1_10?dchild=1&keywords=fan+40x40mm&qid=1626670384&sr=8-10)
Statistics
Likes
2
Downloads
0