Customizable Concave Screw-in Arcade Button - Built strong and doesn't spin or pop out
Description
This is a concave screw-in arcade button built with strength in mind. Line up the notch on the button with the peg in the base and push it in. Once in place it should be very loose on the up and down axis. That peg prevents it from spinning, and the tiny bumps on the sides line up with the holes on the button preventing it from falling out. It uses small and affordable momentary lever switches that have a very satisfying click to them. Just turn the button upside down and snap the lever switch in place. __Buy the switches here:__ https://www.amazon.com/MXRS-Hinge-Momentary-Button-Switch/dp/B07MW2RPJY The hole for these buttons needs to be 27.8 mm for a perfect fit as shown in the photos, or in the range of 27.8 mm - 30 mm. __This button is also customizable!__ You can add letters, symbols or whatever else you want to the button, or change the dimensions to your liking. __You can find the Fusion 360 source file here__ https://a360.co/3hM1Mnv (At the top right of that page is an "Open in Fusion 360" link and a download button) Please share your remix if you make any custom buttons.
Statistics
Likes
30
Downloads
0