SSUPD Meshlicious Side XSPC 240mm Ultrathin Radiator (X-Flow/U-Flow)
Description
This is my first 3D remix ever, I picked up a Ender 3v2 just so I can make custom mounts and brackets for my SSUPD Meshlicious. I used nosaari's template as a starting point but quickly learned that I cannot print his bracket on my Ender 3v2 as the build plate size is too small. I was going to separate it into two separate brackets but turns out one is sufficient to hold the radiator (it's very sturdy). This radiator bracket uses all existing screws & holes, no drilling required! You will have to utilize the existing screws (extras) that come with the case. I utilized the screw from the front 240mm bracket that comes with the case from factory (I use 280mm, so I removed all 6 screws and the two front brackets). The case does need to be in 4-GPU slot mode. I accidentally printed it with 10% infill and it's still very sturdy. I would recommend 50% anyways just in case but so far it's been a week and I have no warping or distortion. I will re-print in 50% infill once I get some new parts soon. Please print on the flat side, no support is necessary. ----------- If you enjoy any of my free creations. Please feel free to donate (optional) as it helps with the time spent designing and updating the model as well as the many prototypes that costs a decent amount of filament. Thank you! PayPal: https://paypal.me/JohnVanLe?locale.x=en_US
Statistics
Likes
4
Downloads
0