2020/2040 Extrusion Cover for V-Slot and T-Slot
Description
Should fit snugly in 2020 and 2040 channels for either T-slot or V-slot rails. I tested with both. There's enough room left in the channel to route wires as well. In order to be snug a single wall is used so the part can flex. Slicer settings are important and make sure to preview it before printing. If you want longer pieces just scale on Z axis. Printing: Brim: 2mm Layer Height: 0.2mm Print slowly for your first try I used PrusaSlicer Print Settings: 0.20mm QUALITY
Statistics
Likes
0
Downloads
0