Roborock S7 cliff sensor covers
Description
For anyone facing the old cliff sensor on dark carpet issue, and wondering why even the latest model hasn't addressed the problem. I created these simple cliff sensor covers to fit the S7. I have an older model, and there are existing things for those, but the design and shape of these sensors is new. NOTE: I am new to 3D printing, and certainly to the model/fabrication side of things. These fit very snuggly and nicely on mine, but I make no guarantees. The space around the sensors is tight, and I had to lightly tap them in with a small hammer. But they went fully in place, and I don't think they will ever fall off. Obviously do not use these if you have stairs or something that the vacuum could fall off of. I only had this orange PLA. Looks good on the black Roborock (probably the white too), but white PLA might be better for these covers. Printing: PLA, not rafts, brims, supports (or even really infill) necessary. Took about half an hour to print all six at once. Printed on Voxelab Aquila
Statistics
Likes
6
Downloads
0