Lakewood Cat Medallion
Description
**Lakewood Cat Medallion** This item is a 50mm diameter coin to celebrate the Lakewood cat program featuring the cat triangle with wheat leaf’s encompassing it. It also features the Lakewood spartan on the opposite side to tribute the school as a whole. This coin would be used as a gift to students, teachers, at magnet fairs, and other events. **Print Setting:** Material used.........PLA Layer thickness......0.1 mm Shells or wall mm..0.8 mm Slicer used.............Ultimaker Cura Extruder Temp........220⁰C Top/Bottom mm......0.8 mm Printer used............M508 Bed Temp...............55⁰C Infill Percent...........20% Mass ................... 6 grams Cost ................... $0.12 Print time.............97 min **Build Notes:** this print was made to be printed with the intruding spartan side down to avoid the need for support. There were no issues with bed adhesion, although some detail is lost on the spartan side if the print speed is too high. The fans are on full for the entire print. --recommended to be printed in higher resolution, (0.2mm nozzle)
Statistics
Likes
1
Downloads
0