H-shifter with sequential mode
Description
This is a 3D printable remix from: https://www.youtube.com/watch?v=FBzPXGkioP8 Mine in action: https://youtu.be/ctGb2LulKnQ Build guide PDF in downloads! Previously I was using the H-shifter from the Thingiverse user Noctiluxx and for me it was too fragile and too light no matter what spring I used, therefore I made this. At the time of writing this I have used the shifter for around 5 hours and have no complaints yet and hope that you guys will enjoy it aswell. The shifter has 3 different modes for the detent spring. If you want you can make the shifting really light, medium or heavy. My shiftknobs inner diameter was 14mm but I printed a 3d printed barrel that I threaded m8 and then pressed it into the knob with a vise. then i put in a m8 rod and threaded it into the 15mm square tube which also had a threaded 3d printed insert. (see photo) If your 15mm tube has 1mm walls use the according files: "insert 1mm wall" *The one I'm using has a h pattern made from 1.5mm sheet aluminium. I myself havent tested the 3d printed version, according to my cad simulations it should work perfectly fine. If there are problems please contact me and I will try to resolve them Included are the drilling templates for the 15mm square tube aswell as a template for the h pattern if you want it to be some other materia. PARTS - 4x m8 30mm - 2x m8 nuts (preferably low profile) - 1x m8 nylon nut - 1x m8 55mm - +- 10 nylon m5 nuts - +- 10 normal m5 nuts (all nylon is probably better for extended use ) - 2x 115mm m5 threaded rod - 3x 70mm m5 threaded rod - 1x m5 40mm bolt - 1x m5 55m bolt - 2x https://www.banggood.com/8mm-SI8TK-Female-Thread-Rod-End-Joint-Bearing-Metric-Thread-Spherical-Oscillating-Bearing-p-987024.html?rmmds=myorder&cur_warehouse=CN - plenty of m8 and m5 washers - for assembly of the swivelling part i used 10 sheet metal screws 3.5mm 15mm long (see photo) - 2x 8x16x5 bearings (688) - 1x 20mm wingbolt - low profile m6 nut - 15mm square tube with the length of around 125mm - 2x m8 threaded rod for the gear selector (40mm) - 2x m4 20mm - 4x m4 10mm - 2x m4 nuts - 4x m3 15mm - 4x m3 10mm - shift knob - 2x 8mm https://www.banggood.com/810121517mm-Bore-Diameter-Zinc-Alloy-Pillow-Block-Flange-Bearing-KFL-Series-p-1119328.html?rmmds=myorder Electronics: 2x https://www.banggood.com/Wendao-V-156-1C25-Micro-Switch-Long-Hinge-Roller-Lever-Stroke-Limit-Switches-10pcs-p-1061479.html?cur_warehouse=CN&rmmds=search 7x https://www.banggood.com/10pcs-5A-250V-3-Pin-Tact-Micro-Switch-Sensitive-Microswitch-Micro-Switches-Handle-KW11-3Z-Limit-Switch--p-1262681.html?rmmds=detail-topright-recommendation&cur_warehouse=CN 1x https://www.amazon.nl/gp/product/B08SC973C8/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
Statistics
Likes
20
Downloads
0