Game Boy Cartridge Holder Wall Display
Description
UPDATE: I had issues with slight variations in some carts causing them to be too tight a fit in the original. I modified the design and added a shelfless, looser style design that has a slightly leaned-back angle to the cart slots to keep them from falling. I recommend you use the "revision 2" model as the carts are much easier to insert and remove. Stores six original or color Game Boy cartridges. Will not fit Game Boy Advance cartridges. This is intended to be affixed to the wall with command strips, but you could also drill holes for mounting or just use it on your desktop. The fit is snug against the side of the cartridge but not damaging and the carts are easily removable, at least in my testing, There is a small tab at the bottom of each cartridge storage slot that slides into the cartridge bottom in order to help keep games from falling off. This tab is thin enough that it doesn't touch the cartridge's electrical contacts. Printed at 0.2mm resolution with cheap gray PLA. I used supports under the tabs and printed with the display lying on the back, with cartridge slots facing up. 30 percent infill.
Statistics
Likes
20
Downloads
0