Skyzone Cobra X/S Battery Tray / Cover
Description
I was annoyed of the big 18650 battery holder on the Skyzone Cobra X I had two Lipos laying around and replaced it. Alternatively I also created a simple cover for the slot which sits flush. How-To: See pictures: Disassemble old battery tray, remove flex PCB, bend into shape, attach wires. Alternatively, remove flex board and solder directly to contacts of connector (saves on ca. 100mV voltage sag). Goggles draw 1.5 to 2A, so use good Lipos. Space for batteries is roughly 70x20x8mm The smaller triangle on right side is only support - cut away after print. Srews used are 2.2x6.5 DIN7982 (normal self-tappers) If you just want the flush cover, use "Skyzone_Cobra_Batt_Tray_Flush.stl" If you want to use with lipos, use "Skyzone_Cobra_Batt_Tray.stl" and "Skyzone_Cobra_Batt_Tray_Plate.stl"
Statistics
Likes
5
Downloads
0