Shapeoko Z Plus Adapter for Suckit Dust Boot
Description
Upgraded my Shapeoko 3 XXL with the Z Plus. Found that my Suckit Dust Boot did not fit the Z Plus. Have tried other dust boots but found the Suckit Dust Boot to be the best. Designed a new adapter in Sketchup 2017 Make and am quite quite happy with the results. I have included the Sketchup files if you think you need to modify something Printing: Printed with PETG in a orientation shown in the image. Sliced in Cura and used 25% infill and Tree Supports. You will need to print 2 Adapters for the left and right sides. Attaching the Adapter: You will need 8 .47 inch (12 mm) Neodymium Magnets. I used Super Glue to glue in the Magnets and seems to work out. Have also included the Nut and knob in case one walked away. I used supoer glue to gule in a 2 1/4 inch 8-32 screw into the knob. Of course the nut plate needs an 8-32 nut which was pressed in. but may need glue as well.
Statistics
Likes
0
Downloads
0