Mamiya RB67 Neck Strap clip
Description
This was designed to help out a friend who had ordered some neck strap clips for his camera, but would not receive them before his trip. There were no models available at the time, so I took some measurements and modeled this. He's using a custom leather strap made out of 4/5 oz. leather, so the strap hole is sized to that. Prototype has been printed out of PLA, <b>but i suggest PETG or ABS for strength. </b> <b>I'm not responsible if this breaks and your camera falls untold depths.</b> Printing at 100% infill takes around 7 min on my printer. I didn't design a lock mechanism for this, as the test print didn't seem to fall off. Fusion 360 file included if you need to change things for your particular strap. *** <b>Printing:</b> Flat side down Cura Settings: Layer Height: 0.2 Support: Off Infill: 100% *** Please don't sell this design for profit. If you make it for a friend or a customer, by all means charge fairly for your time, but don't profit off the design. If this was helpful, and you're feeling generous, feel free to [tip here](https://paypal.me/PipesIII?locale.x=en_US)
Statistics
Likes
4
Downloads
0