Can Crusher
Description
Simple Can crusher, Drawn in Solidworks, splitted to fit my dremel 3D45. Lots of small washers and shims. Remember to scale model appropriately based on your material. I used abs on arm sections 2.5% scale PLA on shims washers and handle, 2% scale PETG on main body and connector pins. 1.5% scale screw holes made for m3 countersunk screws. Made drill size in pins M1.5 to give my wood screws something to chew into. Used 30% infill on loadbearing parts. I.E PETG and ABS parts. PLA parts I gave 20% infill.
Statistics
Likes
0
Downloads
0