ZMR250 ESC Saver
Description
Please Note The License These Are Posted Under. You Should Not Download This Design To Produce For Profit. Consider This A Beta Design. Any And All Feedback Welcome. The Thought Behind This Design Is That It Goes Between The Front Arms And Esc'S. If They Get Hit They Will Absorb Some Of The Impact And Improve The Chances That Your Esc'S Won'T Be Damaged. These Have Not Been Tested. There Are 2 Designs. Esc Saver (No Led).Stl’ - This Design Does Not Have The Led Slot. Esc Saver (Led).Stl - This Design Has A 2.9 X 5.7 Mm Slot To Put An Led Strip Into. The Lights Will Shine Through The Grid. This Design Contains 2 Models (Left And Right). After Printing A Test Of This I Found The Slot For The Led Was A Little Too Small So I Opened It Up By .4Mm. I Have Updated The File And Am Printing Another Test To Validate Sizing Of The Slot. Both Designs Have 2 Slots For Tie Wraps To Go Through. Weight Is About 2.3 Grams Each. Note That You Will Need Support Under The Tab That Goes Between The Arm And Esc But You Do Not Want Support Inside The Grid.
Statistics
Likes
22
Downloads
0