Guardians of Traffic Pillar Hi Res
Description
I remixed this from the Hope Media Guardians of Traffic Pillars on sketchfab (the Hope Memorial Bridge). The mesh was subdivided 2x, I applied the Ambient Occlusion map as a 2x strength displacement modifier, then decimated by .75, all in Blender. I scaled it to 1/144 scale in mm, since I have a lot of N Gage/12mm stuff. It hollowed out nicely in Lychee for resin, and I sunk it about 1.5mm down in Cura to flatten out the bottom for FDM. I'll upload a test print when I can! Scaling Notes: For 6mm - 1/285, scale down 50%. For 28mm - 1/60, scale up 233% - 240%. For other mm measure, divide the new measure by 12 (e.g. 54mm would need 4.5x, or 450%). For other scale measure, divide 144 by the new scale (e.g. 1/100 would need 1.44x, or 144%). Source: https://sketchfab.com/3d-models/guardians-of-traffic-pillar-8541548679934183934920f999c9d39f
Statistics
Likes
27
Downloads
0