Sodastream Bottle Wall Mount
Description
I made these models so that I could attach the Sodastream bottle to the wall. There is four models: - Bottom: Sodastream_Holder_1 - Top single version: Sodastream_Holder_3 - Top Hinge version: Sodastream_Holder_2_Part_1 and Sodastream_Holder_2_Part_2 The hinge version needs the following: - 1 pcs 6 mm partially threaded bolt (at least 34 mm without threads) as a pin for the hing. Cut it at 34 mm from the head. I used the lathe to make the head round, but that is not necessary. - 1 pcs 16 mm partially threaded bolt (at least 34 mm without threads) for the lock mechanism. Cut out a 34 mm piece of the non threaded part. Drill a hole in the center with 6 mm threads. - 1 pcs 6 mm threaded bolt as locking bolt - 4 pcs Screws to attach the mounts to the wall. I used 3 mm screws. Have a look at the pictures to see how I did this.
Statistics
Likes
3
Downloads
0