Odin Systema PTW Adapter

Odin Systema PTW Adapter

Description

Custom systema ptw adapter for the odin speedloader. **If you like my designs and don't mind I would be happy about a beer. (Tip Designer)** **Additional requirements** * A ballpen spring (cut into a sufficient piece ~10mm) * A nail we can use as a bolt for the mag catch lever (1,5-2mm diameter) **Printing** - Layer height: 0.2 mm - Support: yes (tree prefered) - Infill: 20 % - Brim: yes - Material: PETG (PLA should also work but is not recommended) **Assembly** After printing remove the support material and use a 6mm drill to smooth and clean the bb pipe. Cut the ballpen spring to around 10mm and use the bolt (nail) to fix the mag catch lever. You can lock the bolt in place with filament or glue.

Statistics

Likes

3

Downloads

0

Category

Other