ATAS Yaesu Antenna top rubber
Description
Hi Ho a friend asked me while he was not able to find a replacement to make one. And here we are. Printed it with 58A TPU and it was a little stiff but does the job. If you have harder TPU maybe you have to make the part 2% bigger. The top hole has 1 layer closed so it can be printed without support, you only have to "drill" the hole after the print into that 1 layer. Or you use the antenna from the "wrong" side to push via the layer. Nothing else special in this part. If you need it modified, write me an email. Thanks for a TIP Stay safe / Take care Sandor
Statistics
Likes
0
Downloads
0