Shell68
Description
These are reusable wadding for firing 6mm BBs from breech loading paintball guns like the Umarex T4E HDS68. I've found that a mix of steal and paintball 6mm BBs works best. Print: 1 Base 2 Sides 2 Cap .5 (Optional) Connect the two sides to the base. It has ~6mm hole at the top for loading BBs. Optionally add a cap. The completed shell should be then stable enough to hold, but still separate as it leaves the barrel. I have a few experiential caps: * Deconstruction is angled inwards to promote pushing the two halves apart when fired. * Spinning should open up the shot by having the wadding spin. I've not tested these enough to know if this actually works. Notes: * These are very tight in the barrel. It needs a bit of force to load. * Even with the 12ft lb model the individual pellets are quite weak.
Statistics
Likes
4
Downloads
0