Tuning Parts with bearings for Heavy Duty Planetary Astro Tracker Gen 2
Description
My tuning set for the genius design of <b>Heavy Duty Planetary Astro Tracker Gen 2.</b> With these parts it runs very very very smooth and what you need is: <b>24 bearings 688 2RS 8x16x5 mm</b> I printed the gears with Extrudr GreenTec Pro Carbon, all other parts with Princore Carbon PETG, all parts are printed with a 0,4mm nozzle. For the maximum stability, i printed with 100% infill. You must calibrate your printer very well, then you get a really smooth Startracker with minimum play in the gearbox on RA and 0 play on the Axis. The last Picture is my first shot on this tracking mount, i taken 15x 120s frames. The heavy load was a Canon EOS 700Da, IDAS LPS-D1 ClipFilter and a Sigma 18-35 f/1.8 by 18mm f/2.8 ISO/1600. All frames are good, no startrails. I`m very happy :) Happy printing!
Statistics
Likes
4
Downloads
0