Gun4IR Sensor Mounts
Description
Simple and nice way of attaching the IR LED's to your screen. Two led's are slightly angled, one is straight, giving good detection for the Gun4IR Sensor. You need: 1x USB Cable 12x 940nm IR LED's, 5mm, as strong as possible 4x resistor (needs to be calculated to the used LED's (refer to the Gun4IR manual) Piece of prototyping Board for the adapter Box 4x 2 pin connector male 2.54mm (https://www.aliexpress.com/item/32760531736.html?spm=a2g0s.9042311.0.0.27424c4dsohupb) 4x 2 pin connector female 2.54mm Cable/Wire Check the manual for the wiring of the LED's. The adapter is just 4 connectors in parallel connected to 5V and GND of the USB cable. Easy stuff. For any further information check: https://github.com/JayBee-git/GUN4IR
Statistics
Likes
5
Downloads
0