Pi 4 case for Elegoo Neptune 2
Description
Remix to fit on a Neptune 2, remove the LH hand extrusion cover and bolt in place using 2No. M5 socket cap head screws. It's a good idea to tap the extrusion first, but if you don't have a tap, it'll just be harder work! Use a ball end allen key to install, through the HDMI and power holes in the front. And yes, I know it has the same issue as the standard touchscreen in that the bed covers it sometimes, but I didn't want to increase the footprint of the printer. Doesn't cover up the standard SD card slot, and allows the use of a really short USB cable to connect it.
Statistics
Likes
7
Downloads
0