Ender 3/Pro Raspberry Pi camera mount for v slot rails
Description
A modified/mixed version of [KyloBen](https://www.thingiverse.com/kyloben/designs)'s [flexible camera mount](https://www.thingiverse.com/thing:4871420) and [Codemonkey1973](https://www.thingiverse.com/codemonkey1973/designs)'s [Pi camera mount](https://www.thingiverse.com/thing:3294512). Snaps into 40x40 v-slot rails. You will need 1-2 [flexible coolant tubes](https://www.amazon.co.uk/HSeaMall-Plastic-Flexible-Coolant-Nozzle/dp/B07253G4LP/ref=sr_1_13?dchild=1&keywords=Plastic+Water+Oil+Coolant+Pipe+Hose+30cm&qid=1627776201&s=diy&sr=1-13). One should do fine if you don't mind the camera being at an angle. I wanted a bit more wiggle room, so I extended one tube using half the blue segments from another. Print one of each model. Glue `camera_case.stl` & `camera_case_pipe_socket.stl` together, and `rail_mount.stl` & `rail_mount_pipe_socket.stl` together. Attach the coolant tube - for the nozzle end, mine was a press fit, but a bit of super glue probably wouldn't hurt. Snap the mount into your favourite rail and enjoy the view. For the coolant pipe thread I used [WarHawk8080's 5x20 thread template](https://www.thingiverse.com/thing:2269821), and for the v-slot insert I used [MoltenMess' snap-in v slot insert/cover](https://www.thingiverse.com/thing:4460641).
Statistics
Likes
3
Downloads
0