SHooSH a modified WSPR
Description
These are the additional parts you need to print the experimental "SHooSH" blaster, with 3d printed plunger tube and barrel, from my fixitanyway youtube video. https://youtu.be/xLvaiCYSz24 If you are interested in the printed plunger tube assembly itself and want to modify it, an IGES file is included. You'll need: (1) to refer to Captain Slug's original for the main assembly instructions - http://captainslug.com/nerf/WSPRAssembly.pdf (2) Hardware, which in this version consists of: - three types of printed pin (see "clip" files) the longest goes through the centre of the catch mechanism - two screws to hold "Ring_W2" in place; and - A couple of O-rings of a suitable size
Statistics
Likes
0
Downloads
0