Sealed Cylinder Box
Description
This is a freecad parametric cylinder box with closing tap. To customize just open cylbox.fcstd into freecad then hit cylbox/spreadsheet on left Model tree to open the spreadsheet. Setting values into "your value" column allow you to change container parameters. Notes: - values on spreadsheet "your value" column have alias names so the model can reference them through formula ( hit "=" key ) Spreadsheet.aliasname - even not provided with iterative constructs for those macro should used, this simple approach allow me create objects from freecad in the usual way binding their geometric values to parameters that I can change later maintaining relationship between them. - spreadsheet provided with the SanityCheck column that verify some values to allow the cylinder box to be created correctly. In order to allow the box seal work follow notes, in particular for parameters ClosingCapThickness, ClosingCapWireDepth, ClosingCapWireSlotMargin; for example if you use ClosingCapWireSlotMargin 0 then the cap couldn't fit into the slot, while using a too large margin ( suggested 0.2mm ) will cause the cap to release too much easily.
Statistics
Likes
1
Downloads
0