MK3 / BEAR Bigtreetech TFT-35 V3 Cover
Description
A cover for the Bigtreetech TFT35-V3 grafic touch display, suitable for the Prusa MK3 / S / + and BEAR 3D printer using a Bigtreetech mainboard, according to the Bigtreetech drawing. https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0/tree/master/Hardware This is a remix (correction and extension) of a similar thing found on the Prusa page. https://www.prusaprinters.org/prints/22318-btt-tft35-v30-lcd-cover-for-mk3s-bear A support is included for fastening. Screws and nuts are still needed, depending on the 3D printer. MK3: 1 x M3 x 10 screw 2 x screw M3 x 14 1 x M3 x 25 screw 4 x hexagon nut M3 BEAR (v-slot frame): 3 x M3 x 10 screw 1 x M3 x 16 screw The reset button is protected against accidental activation with a small rounded nipple. The included round nut attaches the encoder from the outside of the housing. After printing, remove the 4 small predefined support bars from the cover. I hope you like it. Feel free to get in touch in the comments.
Statistics
Likes
11
Downloads
0