Landmine for Titan Fitness T3 Series
Description
Seemed silly to spend so much on a basic landmine attachment for a 2x3 squat rack. Just got my hands on a Titan Fitness T3 rack and noticed they don't have an accessory at the moment (August 2021). Designed these 3D printable parts that could be used in multiple configurations depending on your use case. I like having mine at the front of the rack. Print out: two (2) Roundover parts, two (2) Hole Spacers, two (2) Small Back Plates, one (1) Full Back Plate You will also need following parts as well: 1. You will need one (1) two inch (2") nipple pipe. Mine is 10" long but you could go longer or shorter. 2. One (1) swivel caster. Got mine from Menards as the 4" version has holes that already line up perfectly with the u bolts. https://www.menards.com/main/hardware/casters-furniture-hardware/casters/shepherd-hardware-cast-iron-swivel-caster-wheel/9782m/p-1444442249703.htm 3. Two (2) u-bolts from Menards or local hardware store. No matter what caster you end up using, I recommend getting this dimension u-bolt as it lines up perfectly with everything: 3/8" x 3-5/8" x 4" https://www.menards.com/main/hardware/fasteners-connectors/bolts/u-bolts/national-hardware-reg-zinc-square-u-bolt/n244-996/p-1444448933322.htm 4. One (1) bolt and one (1) nylon lock nut. I used a 2-1/2" bolt but will end up getting a 3" at some point. Printing: PLA but doesn't really matter Printed parts all with 4 perimeters 20% infill Star infill pattern but probably doesn't really matter
Statistics
Likes
1
Downloads
0